-
Service Areas
South Bay
Los Angeles
Long Beach -
call us now
(310) 692-4183
email us
info@salsplumbing.com
South Bay
Los Angeles
Long Beach
We all have drains that are not “flowing” as well as we would like. Especially here in the South Bay coming out of summer where are drains are full of all kinds of stuff brought in from the beach. Most drain cleaner labels can make you dizzy with all the terminology. Lucky for you, there’s a DIY fix that makes it easy to unclog your own drains.
If you want to save money on drain cleaner and learn a little chemistry along the way, keep reading for the tips you need to know!
When you’re making DIY drain cleaner, it’s best to have a stable list of ingredients that you can afford monthly. Start by researching the baseline supplies for the drain cleaner, then adjust your list to your needs and your budget. Here are the basic ingredients that you’re likely to buy.
Baking soda is one of the best store-bought solutions for drain cleaning. Composed of sodium carbonate, baking soda is full of sodiums that help break down dirt and grime. You can buy baking soda almost anywhere and because of its low price you can buy in bulk. Baking soda is reactive, meaning that if you add an acid (such as vinegar) it will become excited. This compound can jostle and break down grime that’s built up in your drain.
The trick is starting with sodium. This means you can use salt or Borax instead of baking soda just as well. Anytime you combine a sodium base with an acid you will get a halfway decent cleaning solution.
You can think of Borax as a concentrated form of baking soda. It contains a few extra chemical chains that make it a cleaning alternative and not a cooking formula. If you decide to use Borax make sure to keep it away from any sensitive body parts, children, or pets.
Acids are your key to a positive chemical reaction. When you add any acid, even one mild as lemon juice, to sodium, you get a reaction capable of cleaning your drain. If you want to unclog your drain, find a multipurpose acid that you can buy for cheap.
Vinegar is a great acid for your drain cleaning mixture. You can add it to any of the sodiums listed above to get quick results. Lemon juice is a weaker acid that works just as well. However, lemons have less acidity than vinegar, meaning you will have to add more lemon juice than an average drain cleaner recipe.
Cream of tartar is less another option that is derived from tartaric acid. This makes it a viable acid that you can add to baking soda and water to get a great cleaner.
For the most part when you add a weak salt base with a strong based acid you will get an acidic solution. Accordingly, combining medium-strength salts and acids will leave you with a fairly strong compound.
Adding sodium and citric acid will give you carbon dioxide gas. Don’t worry, adding the right amount of both creates enough reaction for drain cleaning. It will not cause you harm.
Now you know the cheapest and most simple ingredients for homemade drain cleaner. For this section, we’ll be talking about how to mix and apply your ingredients to your clogged drain.
Preparations
First, get all of your ingredients in the right order. For example, you will always add your sodium before you add your acid solution. You might have some blockages at the surface of your drain, clean these out before moving forward.
Step 1
Begin by pouring your sodium solution to the drain. Remember, you can use any of the contents listed above. If you choose to use a powder like baking soda, you can use a funnel to pour it down the drain.
This fills your drain with the base to your draining reaction. It makes a foundation for your acid, leading to the dissolution of gunk and grime.
Step 2
Now it’s time you add your acids. You can use any of the acids presented in this post, just make sure to always add them after your sodium. Doing any of these steps out of order will make the process useless.
After you add something like vinegar or cream of tartar to your powdered sodium you must wait up to one hour. It’s advised that you plug your drain while you wait.
Step 3
Add a pot or two of boiling water to your drain. The hot water has an easier time passing through your drain and pushing the dissolved gunk through. This will work for almost any drain you have in your home. If you are dealing with a larger drainage system you might want to buy a professional solution or call a best plumber you can trust.
If you try these steps, you have a good shot at clearing your drain. It’s also a valuable exercise because it will help your plumber get the job done quicker. As always please call Sals Plumbing in Torrance or Sals Plumbing in Redondo for your drain cleaning or any other plumbing problems.
The Sink Plunger
What are the differences between these two plungers? The sink plunger is commonly mistaken for a toilet plunger. They are the plunger with the typically red, flat rubber end. They are flat because they are meant to be applied to flat surfaces, i.e. sinks and bathtubs.
All too often, people use these plungers on their toilets. And then they call us because they can’t plunge what needs to be plunged. The physics of the situation just doesn’t work! The way a sink plunger is designed doesn’t create the necessary vacuum for the proper plunging of a toilet.
The Toilet Plunger
Often called the toilet plunger, this plunger is technically called a flange plunger. Instead of the plunger end being flat, this plunger has an extended rubber cup, perfect for jamming in the business end of your toilet. They are typically plastic, though, and not as durable. Don’t make the plunging mistakes of generation’s past: Buy a sink plunger for your sink and a toilet plunger for your toilet. Of course, some times plungers don’t do anything and you have to get the snake, but that’s a post for another day.
Stay tuned!
Thanks For Reading!
Sal’s Plumbing, the South Bay’s #1 Plumber for over 30 Years enjoys giving homeowners tips on common plumbing problems.
In most cases the water line running to your home is “metered” for accountability and billing purposes. A leak on your line can be very costly. Performing some plumbing leak detection can save you from a nasty surprise from your local utility company. If you have been notified that you have a leak, here are a few steps you can do before calling Sal’s Plumbing in Torrance & Redondo. The more you do, the less it will cost you in the long run!
Check the toilet for leaks by removing the top off the tank and listening very closely. If you hear any hissing at all, try to locate where it is coming from. If you locate the area where the leak is coming from, assess it and determine if you can fix it. If you can’t, then call Sal’s Plumbing at (310) 692-4183
Check the Pressure Relief Valve on the hot water tank. Sometimes these valves are plumbed directly into a drain and may be leaking without your knowledge. If you can’t remove the drain pipe to check for a leak listen for a hissing sound, it may be leaking.
If the toilets are fine, check the line running from the meter to the house. While this may sound difficult, you can save money if you can locate the leak for the plumber.
Many times a leak can be very hard to locate. If you try these steps, you have a good shot at finding your plumbing leak. It’s also a valuable exercise because it will help your plumber get the job done quicker. As always please call Sals Plumbing in Torrance or Sals Plumbing in Redondo for your leak detection or any other plumbing problems – (310) 692-4183.