Sal’s Plumbing has proudly been the South Bay’s emergency plumber for over 40 years. We are experts at drain cleaning, leak detection, repipe & plumbing installations & gas line services.  As such we are often asked for expert plumbing tips.  One question we are often asked is:

What is difference between hard water and soft water?

Have you heard of water referred to as hard or soft? What does that mean and how does it affect your home? Different compositions of water affect your appliances, your body, and how the plumbing in your home functions.. In this article, we will break down what makes water hard or soft, how hard water can harm your home, and how you can handle your hard water issues.

Working with a professional plumber will ensure that you soften your water correctly and that your plumbing system is properly maintained and safe. S&B Plumbing helps with hard water and water softener installations for homeowners.

What Is In The Water In Coastal Homes?

We all know that water is made of molecules (Hydrogen and Oxygen) but the water you drink and use to wash your clothes has minerals in them. Calcium and Magnesium are the most common minerals found in water, and the content of each is counted to determine how soft or hard your water is.  Our South Bay being a coastal city has very hard water due to the proximity to the ocean.

Water picks up these minerals as it passes through geological formations like limestone and clay. The minerals can then build up and cause the water to be harder or softer depending on the mineral count. It is usually measured in parts per million. Soft water typically ranges from 0 to 3.5 PPM, while hard water ranges from 4 to 180 PPM.

Water chemistry runs along a spectrum and can change depending on where it is coming from, city to city, or if you have a water softener system in place. The hardness of your water can change depending on the year or how long you have been using a water softener.

The Effects Of Hard Water Around Your Home

Water with high mineral content can pose risks to your home, your health, and your personal items.  Hard water can affect the following areas:

• Clogged pipes
• Deposits on your faucets
• Damage to your appliances
• Itchy skin and scalp
• Lower water pressure
• Increased energy consumption
• Wear to your fabrics

Depending on the amount of minerals in your water, the damage or effects to these areas will vary. If you have extremely hard water, you may notice your appliances working harder or your fabrics starting to wear down faster. If you begin to notice any damages or effects that could be caused by hard water happening around your home, look into installing a water softener.

Do Hard Water And Soft Water Taste Different?

Hard water can have a more distinct taste because of the dissolved minerals. It can have a more chalky or mineral flavor than softer water. Minerals can also change the flavor and texture of certain beverages like coffee or tea.

Soft water typically has a smoother taste and almost no taste of minerals. Some people can not tell the difference between soft and hard water tastes. Some people like the taste of hard water over soft water. Consider what type of water is best for your drinking and cooking needs.

How Do You Treat Hard Water?

If the risks of hard water are not for you and the taste is unnerving to you, you can take steps to soften the minerals in your water. They may be able to even remove the minerals from the water altogether.

Ion exchange is a technology that uses physical and chemical processes to filter the water in your home through resin or zeolite. Positively charged sodium ions are used to pull the minerals of carbon and magnesium from your water.

Sal’s Plumbing can install water softening systems to help improve your hard water. Water softener systems need to be installed by an expert plumber in order for you to get your money’s worth. After improving your water quality, you will start to notice lower energy bills, cleaner clothes, and healthier skin and hair.

Water softeners also need to have regularly maintenance in order to work properly. Over time clogs and scum build-up can cause your water softener to struggle, so ensure that you have annual plumbing maintenance.

If you would like more information about water softening systems or you are in need of a local plumber,  please give us a call at (310) 692-4183, we are happy to stop by.  Chances are that we have a plumber in Redondo Beach or a plumber in Manhattan Beach or a plumber in Long Beach when you need us!

Thank You!

This blog post was written by eMaximize, a top plumber marketing agency in California.

Plumbing problems in your home can be expensive.  If you don’t address them, you can cause irreversible damage to your home. It’s important to pay attention to the signs, no matter how small they may seem and call an emergency plumber immediately.   Sal’s Plumbing as been the best plumber in the South Bay since 1979.

How to Unclog a Sink: A Step-by-Step Guide

There’s nothing more frustrating than a sink that won’t drain. Whether it’s a slow trickle or a complete stoppage, a clogged sink can throw a wrench in your daily routine. But before you call a plumber, know that most clogs can be cleared with a few tools and a little know-how. This guide will walk you through simple, effective methods to unclog your sink and get your water flowing freely again.

Getting Started: What You’ll Need

Before diving into the task at hand, it’s important to gather the necessary tools and materials. A good plunger, some baking soda and vinegar, a bucket, and a pair of rubber gloves are the basics that will handle most clogs. For more stubborn blockages, you might need a plumber’s snake or a wrench to remove the P-trap. Having everything at arm’s reach will streamline the process and help you tackle the clog efficiently.

Tools and Materials

A plunger is often the first line of defense against a clogged sink. Ensure you have one appropriate for sink use—usually a cup plunger—rather than a flange plunger, which is designed for toilets. Baking soda and vinegar can work wonders as natural, chemical-free decloggers. Keep a bucket handy to catch any water or debris that may come out from the pipes. If the clog is persistent, a plumber’s snake, also known as a drain auger, can help you reach deeper into the drain.

Safety First: Preparing Your Work Area

Before you begin, it’s important to prepare your work area to prevent mess and ensure safety. Clear out any items from under the sink and place a bucket underneath the P-trap to catch any spillage. Don gloves to protect your hands from debris and any cleaning agents you might use. Make sure the area is well-ventilated, especially if you end up needing to use chemical cleaners. Safety glasses aren’t a bad idea either, as they’ll protect your eyes from any possible splashes.

Step-by-Step Unclogging Methods

Now that your work area is prepped and your tools are at hand, it’s time to tackle that clog. Starting with the simplest method first saves time and effort. Often, a clog can be resolved without the need for disassembling pipes or using harsh chemicals. Let’s go through the steps to clear your sink.

The Plunger Technique

First, fill the sink with enough water to cover the plunger’s cup. Place the plunger over the drain hole, ensuring a firm seal. Vigorously pump the plunger up and down several times, then sharply pull it off the drain opening. The pressure created should dislodge any minor clogs. Repeat if necessary, and check to see if the water starts to drain.

Natural Solutions: Vinegar and Baking Soda

If plunging doesn’t do the trick, try a natural chemical reaction to break down the clog. Pour half a cup of baking soda directly into the drain, followed by half a cup of white vinegar. The mixture will fizz and bubble, working to dissolve grease and grime. Cover the drain with a plug or a cloth to keep the reaction contained, and let it sit for an hour. Then, flush the drain with hot water to clear out the loosened material.

Manual Removal: P-Traps and Plumbing Snakes

Sometimes a clog is too stubborn for plunging or natural solutions. In this case, you may need to remove the P-trap—the curved pipe under the sink—to clear the blockage directly. Place a bucket underneath to catch any water and debris, and unscrew the connectors holding the trap in place. Once removed, clean out any accumulated gunk and reattach the trap. If the clog is deeper down, a plumbing snake can be fed into the pipe to dislodge it. Insert the snake into the drain, turning it to catch and break apart the clog, then slowly pull it out.

Advanced Tips for Tough Clogs

When natural methods and manual removal don’t work, it’s time to consider other options. Some clogs are particularly stubborn and may require a more aggressive approach. However, it’s important to use these methods judiciously, as they can be harsh on your plumbing if used incorrectly.

When to Use Chemical Drain Cleaners

Chemical drain cleaners can be effective against tough clogs, but they should be used as a last resort. These cleaners contain powerful chemicals that dissolve hair, grease, and other common blockages. When using a chemical cleaner, carefully follow the instructions on the label, and don’t overuse them, as they can corrode pipes over time. Pour the recommended amount down the drain, wait for the specified time, and then rinse thoroughly with hot water.

Power Tools: Plumbing Augers

For the most challenging clogs, a plumbing auger, or electric snake, can be the tool that finally gets the job done. These power tools are more effective than manual snakes and can reach further into the plumbing system. Feed the auger’s cable into the drain until you feel resistance, then activate the motor to break through the clog. As with any power tool, use caution and read the safety instructions before operating.

Maintenance Tips to Prevent Future Clogs

Preventing clogs is easier and less frustrating than dealing with them after they occur. Regular maintenance can help keep your sink draining smoothly and prevent the buildup that leads to clogs.

Regular Cleaning Routines

Make it a habit to clean your drains regularly. Flushing your sink with boiling water once a week can help melt away fat and grease before they solidify in the pipes. Using a mixture of baking soda and vinegar monthly can also maintain a clear drain. Installing a sink strainer can catch debris that would otherwise contribute to clogs, reducing the likelihood of blockages.

What Not to Put Down Your Sink

Being mindful of what goes down your sink is crucial for preventing clogs. Avoid disposing of grease, coffee grounds, and food scraps in your sink. Even if you have a garbage disposal, fibrous materials like celery and onion skins can cause issues. Educate everyone in your household about these guidelines to ensure your sink remains clear.

Wrapping Up: Ensuring a Clear Drain

After working through the steps to unclog your sink, it’s important to do a final check to ensure everything is flowing smoothly.

Final Checks and Tests

Once you’ve cleared the clog, run hot water down the drain to ensure it’s completely open. Check for leaks under the sink, especially if you’ve removed the P-trap. If everything looks good and the water is draining quickly, you’ve successfully unclogged your sink.

When to Call a Professional

If you’ve tried everything and your sink is still not draining, it may be time to call the best plumber in Torrance. Sometimes clogs are symptomatic of more significant issues further down the line that require specialized tools and expertise. Don’t be afraid to call in the experts when necessary. It’s better to resolve the issue properly than to risk further damage to your plumbing.

Unclogging a sink can be a straightforward DIY task with the right tools and knowledge. By following these steps, you can save yourself the cost and hassle of a plumber’s visit. Remember, regular maintenance is key to keeping your drains clear and avoiding future clogs. With a little effort, you can keep the water flowing and your sink in top shape.

If any of these Plumbing Problems persist and you don’t have the time to deal with them, please give us a call at (310) 692-4183, we are happy to stop by.  Chances are that we have a plumber in Redondo Beach or a plumber in Manhattan Beach or a plumber in Long Beach when you need us!

Thank You!

This blog post was written by eMaximize, the top plumber marketing agency in California.

Plumbing problems in your home can be expensive.  If you don’t address them, you can cause irreversible damage to your home. It’s important to pay attention to the signs, no matter how small they may seem and call an emergency plumber immediately.   Sal’s Plumbing as been the best plumber in the South Bay since 1979.

Homes near the beach often face unique challenges when it comes to plumbing due to the corrosive effects of saltwater, sand, and high humidity. Here are some plumbing tips for beach homes to help you maintain your plumbing system in a coastal environment:

1. Install Corrosion-Resistant Plumbing Materials:
   • Use corrosion-resistant materials like PVC, CPVC, PEX, or copper nickel for your plumbing pipes and fixtures. These materials are less susceptible to corrosion from saltwater and salty air.
2. Regularly Inspect for Corrosion:
   • Periodically inspect your plumbing system for signs of corrosion, such as rust or pitting on metal pipes and fixtures. Address any corrosion issues promptly to prevent leaks or pipe failures.
3. Flush Pipes with Fresh Water:
   • After spending time at the beach, flush your plumbing system with fresh water to remove salt and sand residue. This includes running fresh water through faucets and showerheads.
4. Invest in a Whole-House Water Filtration System:
   • Consider installing a whole-house water filtration system to remove impurities, including salt and minerals, from your water supply. This can help prolong the life of your plumbing fixtures and appliances.
5. Elevate Plumbing Fixtures:
   • Raise plumbing fixtures, such as toilets and sinks, above potential flood levels to minimize damage in case of a coastal flood or storm surge.

    

   

6. Regularly Maintain Sump Pumps:
   • If your home is prone to flooding, maintain your sump pump and ensure it is in good working order. Regular testing and maintenance can prevent water damage in coastal areas prone to flooding.
7. Protect Outdoor Faucets:
   • Install frost-proof outdoor faucets to prevent freezing during colder months. Also, consider covering outdoor faucets when not in use to protect them from the salty air.
8. Inspect and Maintain Septic Systems:
   • If your home uses a septic system, have it inspected and pumped regularly to prevent issues. Coastal areas may have a high water table, which can affect septic systems.
9. Use Non-Corrosive Plumbing Fixtures:
   • When choosing plumbing fixtures, opt for non-corrosive options made from materials like stainless steel or brass.
10. Regularly Check for Leaks:
    • Periodically inspect your plumbing for leaks, especially in areas that are less frequently used. Leaks can go unnoticed for a long time in vacation homes.
11. Consider Hurricane Shut-off Valves:
    • In hurricane-prone areas, consider installing shut-off valves for your water supply that can be easily closed in case of a storm to prevent water damage.
12. Have a Reliable Plumber’s Contact:
    • Keep the contact information of a local plumber who is familiar with the unique challenges of coastal plumbing for emergency repairs or maintenance.

By following these tips and staying proactive with maintenance, you can help protect your plumbing system in a coastal environment and minimize the risk of corrosion and damage from saltwater and sandy conditions.

Summary of Plumbing Tips For Coastal Beach Homes

If any of these Plumbing Problems persist and you don’t have the time to deal with them, please give us a call at (310) 692-4183, we are happy to stop by.  Chances are that we have a plumber in Redondo Beach or a plumber in Manhattan Beach or a plumber in Long Beach when you need us!

And if you need window cleaning in Redondo Beach, please consider Window Washing 2000, the very best in the South Bay since 1997.

Thank You!

This blog post was written by eMaximize, the top plumber marketing agency in the U.S.

Plumbing problems in your home can be expensive.  If you don’t address them, you can cause irreversible damage to your home. It’s important to pay attention to the signs, no matter how small they may seem and call a your emergency plumber immediately.   Sal’s Plumbing as been the best plumber in the South Bay since 1979.

Sometimes you might not even know that there’s a problem. Therefore, it’s crucial to analyze the following hidden signs.

How You Can Tell Your Home Needs a Plumber

1. Low Water Pressure

There’s nothing more annoying than jumping in your shower and having to run around to get wet.  Low water pressure may be an indication that there’s a clog in your pipes. A leaking pipe can also block water flow which can make the water pressure. Low water pressure throughout your home is a clear sign that you have a plumbing leak or clog and may need to call a drain clean plumber.

It’s important to figure out if your leaking pipe is confined to one area of your home or whether it’s affecting your entire plumbing system. If your water is leaking in more than one location, turn off all your taps and check your water meter. If the number of gallons has changed on your water meter, you might have a leak that needs to be repaired.

2. Slow Drainage

Your sink and showers can build-up debris like hair, soap and other bathing products. When pipes throughout your house become slow to drain, you might have a clog in the main sewer line. Clearing out the blockage yourself sometimes causes more damage to your pipes. It’s important to call the best plumber as soon as possible.

3. Damaged Wallpaper or Paint

If you notice cracking, peeling or blistering paint on your walls or ceiling, this may be a sign of a plumbing leak. Drywall can start to have a bubble-like texture and eventually fall apart. If your drywall gets damaged it will have to be torn out, patched, and painted. This can be an expensive process as you may also require an interior painter.

An surprisingly expensive water bill is usually a clear sign that there is some major leaking going on in your plumbing system. If you can’t explain a sudden increase in your water bill, don’t hesitate to call an emergency plumber to investigate. High water bills are usually the first sign that your house needs to be examined by a professional plumber like Sals Plumbing.

5. Mold or Mildew

You can also use your sense of smell to sniff out plumbing problems in your home. Mildew is a musty smell that can become increasingly pungent. It can grow in areas of your home that have a plumbing leak. It will usually develop within 48 hours of water exposure. However, sometimes they’re invisible to the human eye as they can be concealed within your floor due to a broken heating pipe. If you notice your tiles bulging, this could be a sign of a leak.

Another sign you might need a plumber is mold, which is a fast-spreading bacteria that feeds on the moisture of different structural materials. Mold can also lead to health problems such as sore throat, coughing, headache, watery eyes, and sneezing. Contact your local plumber immediately if you find mold in your home, as it could be a sign of a plumbing leak.

If any of these Plumbing Problems persist and you don’t have the time to deal with them, please give us a call at (310) 692-4183, we are happy to stop by.  Chances are that our emergency plumbers are nearby in the South Bay and from LAX to Long Beach,.

Thank You!

Sal’s Plumbing has been providing expert plumbing services in the South Bay and Los Angeles for over 30 years.  Whether it’s leak detection or a simple drain clean, our expert plumbers enjoy serving our customers in the South Bay and surrounding area.  That said we are passing along some home improvement information to help you avoid common plumbing problems in your home.

Whether you own your own home or rent an apartment, you will most certainly run into a few toilet, sink or bathtub challenges along the way. It is not always possible to get a plumber to the scene right away, either, so it is important to know what to do about a few common plumbing problems.

Toilet Will Not Flush

This is often a very basic problem that can be resolved relatively easily. The first thing to do is to take the lid off of the tank and look inside. Inside the porcelain tank, there should be a chain with a hook attached to the flushing handle and a rubber stopper. Sometimes the hook and chain have simply fallen out of the handle. Thread it through, replace the tank’s lid and boom!  Your toilet is back in business.

Broken Chain or Handle

There are times when the internal flushing device has broken due to breakage of the chain or even the external handle, if it’s plastic. In this case, remove the broken parts, place all in a plastic bag and drive to the local home improvement warehouse in your neighborhood. Go to the plumbing aisle and find a device that matches the broken one. Return to the malfunctioning bathroom and replace. Boom! The important thing is to remember where everything goes before taking it apart.

The Toilet is Clogged

There are so many things that can clog a toilet and often some toilets are “sensitive” due to the pipes. What is a homeowner to do?  Keeping a plunger in every bathroom is highly recommended. The plunger is a tool with a rubber suction cup attached to a pole. The internal toilet opening in the back of the bowl underwater is first covered with the rubber suction cup. The tool is pushed up and down repeatedly forcing the clog to be pushed on its way down and out into the sewer system.

Garbage Disposal Will Not Turn On

Garbage disposals are handy appliances for getting rid of food scraps by grinding it up and sending it out through the pipes. There are times that something has caused it to stall and it simply will not turn on with a flick of the switch. What to do? Well, before panicking, calling a Los Angeles plumber or replacing the disposal, open the cupboard doors and peer in below the sink. There upon the black cylindrical disposal, is a tiny red re-set button. Push it. Try the switch again. Most of the time, like magic, the garbage disposal will reset itself and return to normal operations.

If any of these Plumbing Problems persist or you don’t have the time to deal with them, please give us a call at (310) 692-4183 , we are happy to stop by.  Our plumbing technicians are in the South Bay all day, every day and from LAX to Long Beach,.

Thank You!

Sal’s Plumbing, your South Bay Plumber for over 30 years is determined to bring our customers useful information when it comes to taking care of your plumbing issues and many other DIY projects for your household. This particular plumbing article explains how to water your lawn without wasting water.

All types of South Bay homes can have problems with water pressure whether they are old, new or remodeled. The build up of minerals in the water that can damage your water pipes and make your drinking water taste unpleasant. Build up in galvanized pipes can even discolor the water. Corrosion inside of pipes will also eventually cause the pipe to rust through and leak. The quality of the water inside your pipes is not the only source of corrosion build up. When copper and galvanized pipes are used together in a plumbing system electrolysis can occur. Dielectric unions can be installed as one solution to this problem.

Copper pipes should last for many years but once damage becomes noticeable it is time to start thinking about replacement. You may not need to have all of the plumbing lines in your home replaced. Sometimes the replacement of just the main line coming into your home will be sufficient in improving your water pressure. Only a qualified plumber will truly be able to help you determine exactly how much work will need to be done. Depending on the age of your plumbing you may even need to have fixtures replaced as these can build up corrosion as well. If you are considering a replacement of some of your plumbing lines have a pressure test done on your system. If you increase the pressure in your lines you may develop leaks in weak joints or older pipes.

One important thing to remember is if the city or county water system does not have good pressure, your home will not have good pressure. Water pressure boosters are available that can be added to your plumbing if your problem is with the supply source.

Give us a call for an estimate on your plumbing needs at (310) 692-4183. We are available 24/7 to help you with your household plumbing needs and are committed to providing excellent service to our clients!

We hope this plumbing article was helpful to you. Please consider Sal’s Plumbing whether you are looking for a plumber in Torrance, a plumber in Redondo Beach or a plumber in El Segundo.

If you have questions about your plumbing, please do not hesitate to give us a call.  We are happy to help in any way possible!   Sals Plumbing – (310) 692-4183

Sal’s Plumbing, South Bay’s family owned plumbing business for 30 years is determined to bring our customers useful information when it comes to taking care of your plumbing issues and many other DIY projects for your household. This particular plumbing article is about avoiding water damage in your home.

Winter is on its way, and there’s nothing worse than taking time and money away from your holiday preparation in order to deal with pipe bursts and leaks.  Water damage can be extremely harmful to your home, so our team is sharing some of our top ways to protect your home from excessive moisture and burst pipes:

1. Make Sure Your Thermostat is Working

One of the most common causes of water damage is burst pipes. To avoid this issue, check your thermostat to ensure everything is working as well as it can be. If you have an older model, this means checking the batteries to ensure your thermostat won’t unexpectedly stop working. If you’re worried about your thermostat, consider switching to a wifi-connected model, which is designed to handle problems like dead batteries.

2. Check For Corrosion

In some cases, particularly when they’re made out of steel, your pipes will burst quite simply because they’ve taken on too much water abuse over the years. When this occurs, pipes will corrode, narrow, and slowly bust open.

There’s not much you can do to avoid corrosion in steel pipes. However, by replacing them with copper or plastic pipes, you shouldn’t ever have to worry about corrosion again.

3. Prepare Your Home When Leaving Town

Regardless of what preventive measure you take, you never know when to expect a surprise cold front. If you have plans to leave town (even for a short weekend), hire or ask one of your family friends to check on the house while you’re out of town. Make sure to keep the thermostats set to a minimum temperature of 55 degrees Fahrenheit to better prevent burst pipes from freezing temperatures. There are also smart gadgets that alert you (via your smartphone) to issues such as leaks at home.

We hope this plumbing article was helpful to you. Please consider Sal’s Plumbing whether you are looking for a plumber in Torrance, a plumber in Redondo Beach or a plumber in El Segundo.

If you have questions about your plumbing, please do not hesitate to give us a call.  We are happy to help in any way possible!   Sals Plumbing – (310) 692-4183

Sal’s Plumbing, South Bay’s plumber for over 30 years, specialize in an array of services including installation and servicing of your water heater. We offer a wide array of both Tankless water heaters and conventional from the most trusted names in plumbing. Our water heater specialists at Sal’s Plumbing can help you decide whether or not Tankless Water Heaters are the right fit for you.

The following are some points to consider in deciding whether Tankless Water Heaters would be the most cost effective and best fit in your home or place of business.

Benefits of Tankless Water Heater:

• Most Tankless Water Heaters come with a federal tax rebate of $300.
• They never run out of hot water.
• They last five to 10 years longer than traditional water heaters.
• They’re more efficient with no standby heat loss.
• Tankless Water Heaters take up less space and can be installed on walls or outdoors.
• Smaller units can be installed under cabinets or in a closet, closer to the point of use.
• They only need enough power to heat the amount of water necessary at any given moment.
• You can shave as much as 20 percent from your water heating bill.
• Electric models don’t produce greenhouse gases.
• Most units are operated by remote control and have up to four separate settings available.
• There’s no possibility of flooding due to a ruptured tank.

Drawbacks of Tankless Water Heater:

• They cost up to three times as much as a tank water heater.
• Your hot water output is split among all your household fixtures.
• You may need to add a larger natural gas line to supply the unit with enough fuel.
• Venting gas and propane units requires expensive stainless steel tubing.
• Electric models may require an additional circuit.
• Gas-powered units produce greenhouse gases.
• Gas units require the additional expense of an annual servicing.
• Electric models require a lot of energy.
• They need a minimum flow rate of .5 GPM in order to activate the heat exchanger.
• The delay required to run your water in order for it to get hot increases water waste.

Other Considerations:

• Water heating accounts for about 20 percent of your home energy budget.
• A whole-house electric model costs $500-$700.
• A whole-house gas model costs $1,000-$2,000.
• Natural gas is less expensive now, but expected to surpass electricity in the coming years.
• A standard bathtub holds about 35 gallons, soaking tubs hold between 45-80 gallons.

In addition to these points, there are many other valid points to consider when looking into the possibility of installing tankless water heaters. If you have any questions or would like a consultation, please give us a call at (310) 692-4183.  We are happy to help!

If you are having trouble with the drainage in your home, or you suspect that you have sewer problems, then you are probably dreading the repair process.  Drain and sewer repair is no longer a costly and labor intensive process.  New plumbing technology and equipment has allowed the diagnosis and repair to be completed quickly, usually in one day.  You may be wondering what you can expect from sewer line repairs

At Sal’s Plumbing, your South Bay Plumber for over thirty years, you can expect top notch service and job completion in a short amount of time. These repairs no longer cost a fortune, but are economical and do not require your home or property to be damaged.  We will come to your home and give you an accurate estimate, and then complete the services in a timely and professional manner. Our professionally trained plumbers will take measures to ensure that your personal property remains free of dirt and debris.

We will perform analysis of your drainage problems using video cameras to provide a clear and precise picture of where the issue is and exactly what is required to repair the problem. There are methods that they can be used to repair pipes without digging up your yard. If there is a clogged or an obstruction in your sewer line we will be able to remotely access it and remove the problem. By using these methods, you can get repairs that used to take days completed in only hours.

Once our job is completed you can expect to have free flowing water and drainage from all your sinks and toilets.  If you suspect you have a sewer line problem, please give us a call, we are happy to come by and provide an estimate. (310) 692-4183.